MAC Address Lookup

Paste one MAC address or a whole switch MAC address table and see the registered vendor, the IEEE block it comes from and whether the address is unicast, multicast, factory-assigned or randomized. The lookup runs in your browser against the IEEE public registry, and the worked examples below show how to use it to find cameras, phones and unknown devices on a site network.

Techubox

MAC Address Lookup

Find the vendor behind any MAC address, or paste a whole switch MAC table and see which ports hold cameras, phones and unknown devices.

FreeNo sign-upBulk lookupIEEE MA-L / MA-M / MA-SRuns in your browser

1 · Paste MAC addresses

Any format: 00:1A:2B:3C:4D:5E, 00-1A-2B-3C-4D-5E, 001A.2B3C.4D5E, 001A2B3C4D5E or just the first 6 to 9 hex digits. Text around each address (VLAN, port, IP) is kept as context. Ctrl + Enter runs the lookup.

Duplicates

IEEE registry (18 Nov 2026) loads on your first lookup, about 0.6 MB, then works offline.

MACs found
–
Vendor matched
–
Local / random
–
Not in registry
–

Reading the flags

  • Global (UAA) set at the factory from an IEEE block, so the vendor lookup applies.
  • Local / random set by software: phone and laptop private Wi-Fi MACs, VMs, virtual interfaces. No vendor.
  • Multicast a group address (STP, LLDP, IPv4/IPv6 multicast), never a single device.
  • Block MA-L /24, MA-M /28, MA-S or IAB /36: how much of the address the IEEE assigned to the owner.

2 · Results

Results appear here.

Vendor data: IEEE Registration Authority public MA-L, MA-M, MA-S and IAB listings, downloaded 18 Nov 2026. A MAC can be changed or randomized, so treat the vendor as a strong hint, not proof of what a device is.

To download and print this tool without a watermark, please log in and request approval.

Why a MAC address lookup saves time on site

On commissioning day the switch knows more than the drawings do. Every device that has sent a frame sits in its MAC address table with a VLAN and port, but only as twelve hex digits. The first part of each address tells you who made the network interface, which answers the questions that matter: is port 14 really the camera on the drawing, and what is the unlabelled box on the management VLAN? This tool turns that table into a vendor list you can filter, copy into a snag list or export to CSV.

How a MAC address is built

A MAC address is 48 bits, written as six bytes: 00:40:8C:12:34:56, 00-40-8C-12-34-56 or 0040.8c12.3456 are the same address. The IEEE Registration Authority sells blocks of addresses to manufacturers:

  • MA-L (large, the classic OUI): the first 24 bits are fixed, leaving about 16.7 million addresses for the owner.
  • MA-M (medium): the first 28 bits are fixed, about 1 million addresses.
  • MA-S (small) and the older IAB: the first 36 bits are fixed, 4,096 addresses. Small makers of controllers, sensors and industrial devices often use these.

MA-M and MA-S blocks sit inside 24-bit blocks held by the IEEE itself, so the tool checks the longest match first. 70:B3:D5:1F:00:00 resolves to its MA-S owner, Harmonic Design GmbH, while the bare prefix 70B3D5 shows only “IEEE Registration Authority”.

Two bits in the first byte matter as much as the vendor. The lowest says unicast (one device) or multicast (a group); the next says globally unique (set at the factory) or locally administered (set by software). Quick rule: a second hex digit of 2, 6, A or E means a locally administered unicast address.

Using the tool

  1. Paste addresses, one per line, or the raw output of show mac address-table, display mac-address, arp -a or a DHCP lease list. Any common format works, and so does a 6 to 9 digit prefix.
  2. Press Look up. The IEEE file (about 0.6 MB) downloads once; nothing you paste leaves your browser.
  3. Tap a vendor chip or type a port, VLAN or vendor to filter, pick the MAC format your report needs, then use Copy table or Download CSV.

Worked example 1: cameras in a switch MAC table

Press Load sample switch table to load a short Cisco-style table from an access switch. The tool finds 11 MACs, matches 9 to a vendor, flags 2 as locally administered and finds 0 that are missing from the registry. On camera VLAN 20 it shows Axis Communications AB on Gi1/0/1, Hangzhou Hikvision Digital Technology on Gi1/0/2 and Gi1/0/4 and Zhejiang Dahua Technology on Gi1/0/3, with a second Axis camera on VLAN 30, port Gi1/0/5. That matches a mixed-brand camera schedule, so those ports can be ticked off.

Many cameras are built by one factory and sold under another brand, and an OEM camera often carries its maker’s address block. A “Hikvision” result on a port drawn as another brand is a reason to check the label, not proof of a wrong install.

Worked example 2: finding a rogue device

The same sample has a line that should not be there: Raspberry Pi Trading Ltd on Gi1/0/6, inside camera VLAN 20. It could be a contractor’s test box or someone sniffing camera traffic. Trace the lead from Gi1/0/6, remove the device and consider port security or 802.1X on camera ports. The REALTEK SEMICONDUCTOR CORP. result on management VLAN 99 (Gi1/0/9) deserves a second look too: Realtek makes the network chip, not the device, so it could be a laptop dongle, a mini PC or a budget recorder.

Worked example 3: randomized phone MACs and virtual addresses

Ports Gi1/0/7 and Gi1/0/8 on VLAN 60 show 6A:3C:11:E2:9F:07 and DA:B7:2C:01:4E:08. Their second hex digits are A, so both are locally administered and have no vendor. That is normal for phones and laptops: current iOS, Android and Windows releases can use a private, randomized Wi-Fi address per network. If a network relies on MAC filtering or DHCP reservations, turn the private address off for that network, or move to 802.1X.

Some addresses are virtual by design. The static entry 0000.0c9f.f00a on Vl40 resolves to Cisco Systems, Inc and the tool notes it is an HSRP version 2 virtual MAC: the last three digits, 00A, are group 10. Seeing it means the gateway is redundant, not that a Cisco device sits on a port.

Tips and common mistakes

  • A MAC table only lists devices that have talked recently: ping the subnet first if a quiet camera is missing. Entries on an uplink are devices behind another switch.
  • A “Not found” result means the prefix is not in the IEEE public listing: it may be newly assigned, spoofed or simply mistyped.
  • Plan the VLANs before you chase devices. The IP Subnet & VLAN Planner sizes each subnet, the Network & CCTV Designer draws the switch layout and the PoE Budget Calculator checks power on each camera switch.

What the tool does not do

It does not scan the network or contact any device; it only reads text you paste. The vendor is who registered the block, not the device model, and any MAC can be changed in software. The IEEE file is a snapshot dated 18 Nov 2026. The country is the registrant’s address in the IEEE record, not where the device was made.

Standards notes

The address structure, the unicast/multicast bit and the universal/local bit are described in IEEE Std 802 (Overview and Architecture) and its amendments, and the IEEE Registration Authority publishes the MA-L, MA-M, MA-S and IAB listings used here. Multicast mappings such as 01:00:5E for IPv4 and 33:33 for IPv6 come from IETF RFCs. These documents give guidance; check the current editions and listings, and the client’s IT security policy, before relying on a MAC address for access decisions.

Frequently asked questions

Can a MAC address tell me the exact device model?

No. It identifies the company that registered the address block. Combine it with the port, VLAN, IP address and the device’s web page or ONVIF details to confirm the model.

Why does a MAC address show “Locally administered”?

The address was set by software instead of the factory. Phones and laptops do this for privacy on Wi-Fi, and virtual machines, containers and some routers do it for virtual interfaces. The IEEE registry does not cover these addresses.

Which formats can I paste?

00:1A:2B:3C:4D:5E, 00-1A-2B-3C-4D-5E, 001A.2B3C.4D5E, 001A-2B3C-4D5E, 001A2B3C4D5E and short forms such as 0:1a:2b:3c:4d:5e, mixed with other text on the line.

When a device you found here will not appear on the recorder, the guide IP camera not showing on NVR walks through the usual fixes, and VLAN for CCTV systems and CCTV cybersecurity cover how to keep camera VLANs clean.

Scroll to Top